3D Printer / CNC Linear Shaft Hard Chrome Plated Bar

- Oct 18, 2018-

3D Printer / CNC Linear Shaft Hard Chrome Plated Bar Basic Info

Model NO.: SF3-120
Hard Chrome Plated Bar Roughness: Ra 0.2μm~0.4μm
Chrome Layer Hardness: Hv800-1000
Chrome Layer Thickness: 15 ~ 25micron
Transport Package: Paper Sleeve and Wooden Box
Hard Chrome Plated Bar Specification: dia 3-120mm
Origin: China
HS Code: 8483109000

3D Printer / CNC Linear Shaft Hard Chrome Plated Bar Product Description

Hard Chrome Plated Bar Main Products:

Hard Chrome Plated Rod, Hydraulic Piston Rod, Cylinder Piston Rod, Chromium Rods, Linear Shafts, SBR Shafts, Hard Chrome Shaft, Induction Rod, Induction Shaft, etc.

the range of Diameters include: 3-120mm
 
 Item ODmm                                
Hard Chrome Rod  310 12 13 14 15 16 17 18 20 22 25 28 30 32 35 40 45 50 55 60 65 70 75 80 85 90 100 110 120 
Induction Hard Chrome Rod 310 12 13 14 15 16 18 20 22 25 28 30 32 35 40 45 50 55 60 65 70 75 80 85 90 100 110 120 









The hard chromium piston rods produced by our company come with more than JIS S45C material, where the rods first undergo precision milling and processing, and are then put through gard surface chromium treatment, allowing a surface precision level of f7, and a surface hardness reaching HV800 minimum and up, which not only help to improve wear resistance but also help to extend the life cycle of the rods, thus helping the customer save cost.

The corrosion resistances is tested in our own internal salt spray laboratory, and The rods surface heat treatment and hardness reaching HRC55°±2°, and at a hardened depth of between 0.5mm - 3mm, before the rods are put through precision milling and hard chromium treatment for a membrane thickness measuring 20 micron ± 10% to drastically improve the rod's wear resistance, and help to extend the life cycle of the rods.


1. Chrome Plated Steel Bars:

Our Chrome Plated Bars are produced from medium carbon cold-finished or hot rolled steel bars usually in 1045 grades. The bars are centerless ground, polished, and chrome plated to a minimum thickness of 0.0005", and 0.001" per side. 
Chrome Plated bars are specifically designed to be used for most piston rod applications in hydraulic and pneumatic cylinders.

2.  Induction Hardened Chrome Plated Bars:

Our  Induction Hardened Chrome Plated Bars are produced by using advanced processing techniques usually on JIS S45C, SAE1045 or DIN CK45 steel rods, for surface removal, polishing, induction hardening, followed by hard chrome plating to a thickness minimum of 0.0005" or 0.001" per side. The finished product results in a superior impact resistant bar ideal for high quality piston rods capable of handling tough environments.

3D Printer / CNC Linear Shaft Hard Chrome Plated Bar Applications:

Linear Motion Guides, Hydraulic cylinder rods
plastic injection molding machines, construction equipment, rubber molding machines, papermaking machines, printing machines, refrigeration equipment, foods and chemical machinery, loading equipment, fiber spinning equipment, textile machinery, agricultural equipment, automotives, shipbuilding and the like.



3. Cold Drawn Seamless Mechanical Tubing (CDS)

is a cold drawn 1020 steel tube. Produced from piercing hot rolled bar stock, the cold drawing process increases the tube's physical properties reducing the cost of machine time. Cold drawn seamless tubing provides a better uniformed OD and ID, enhanced machinability, increased strength, and tighter tolerances compared to hot finish seamless products

3D Printer / CNC Linear Shaft Hard Chrome Plated Bar Applications:

Hydraulic cylinders
Truck and Automotive parts
Heavy equipment
Agricultural components
Auto and Truck Axles, Suspension parts and shock absorbers
High Speed Shafts and rollers

Bearings and Spacers, Roll cages, and many other machined tubular parts.


3D Printer / CNC Linear Shaft Hard Chrome Plated Bar