Chrome Plated Hydraulic Piston Rod

Chrome Plated Hydraulic Piston Rod

Professional manufacturer of Hard chrome rod for hydraulic, founded in 2004, major in honed tube, hydraulic tube, chrome rod, chrome bar, chrome shaft, at present we are biggest manufacturer and wholesaler in north of China. Chrome plated hydraulic piston rod The chrome plated hydraulic piston...

Product Details

Professional manufacturer of Hard chrome rod for hydraulic, founded in 2004, major in honed tube, hydraulic tube, chrome rod, chrome bar, chrome shaft, at present we are biggest manufacturer and wholesaler in north of China. 


Chrome plated hydraulic piston rod

The chrome plated hydraulic piston rod was produced by our company, tolerance f7, surface hardness reaching HV800 or above, which not only help to improve wear resistance but also help to extend the life cycle of the rods, thus helping the customer save cost.


The corrosion resistances is tested in our own internal salt spray laboratory, and The rods surface heat treatment and hardness reaching HRC55°±2°, and at a hardened depth of between 0.5mm - 3mm, before the rods are put through precision milling and hard chromium treatment for a membrane thickness measuring 20 micron ± 10% to drastically improve the rod's wear resistance, and help to extend the life cycle of the rods.


1. Chrome Plated Steel Bars:

Chrome Plated Bars are produced from medium carbon cold-finished or hot rolled steel bars usually in 1045 grades. The bars are centerless ground, polished, and chrome plated to a minimum thickness of 0.0005", and 0.001" per side. 

Chrome Plated bars are specifically designed to be used for most piston rod applications in hydraulic and pneumatic cylinders.


2. Induction Hardened Chrome Plated Bars:

Induction Hardened Chrome Plated Bars are produced by using advanced processing techniques usually on JIS S45C, SAE1045 or DIN CK45 steel rods, for surface removal, polishing, induction hardening, followed by hard chrome plating to a thickness minimum of 0.0005" or 0.001" per side. The finished product results in a superior impact resistant bar ideal for high quality piston rods capable of handling tough environments.


Applications:

Linear Motion Guides, Hydraulic cylinder rods

plastic injection molding machines, construction equipment, rubber molding machines, papermaking machines, printing machines, refrigeration equipment, foods and chemical machinery, loading equipment, fiber spinning equipment, textile machinery, agricultural equipment, automotive, shipbuilding and the like.


3. Cold Drawn Seamless Mechanical Tubing (CDS)

Cold drawn 1020 steel tube. Produced from piercing hot rolled bar stock, the cold drawing process increases the tube's physical properties reducing the cost of machine time. Cold drawn seamless tubing provides a better uniformed OD and ID, enhanced machinability, increased strength, and tighter tolerances compared to hot finish seamless products


Applications:

Hydraulic cylinders

Truck and Automotive parts

Heavy equipment

Agricultural components

Auto and Truck Axles, Suspension parts and shock absorbers

High Speed Shafts and rollers

Bearings and Spacers, Roll cages, and many other machined tubular parts.

Any inquiry or need please contact us.

patrick@longyuehydraulic.com


Inquiry